Rebuilding a frame, Locost kit-car style, and need a pedal box as used on vees.
Prefer pedals hung, and box drilled for three master cylinders.
Thanks!
Gary, NJ . . . Gcssbn at aol dot com
WTB foot pedal box
-
- Posts: 53
- Joined: June 26th, 2006, 6:50 pm
Re: WTB foot pedal box
Limited fabrication skills and tools, . . I don't want to reinvent the wheel.
Anyone have a wreck they would cut the footbox out of?
Thanks for looking, Gary, NJ
Anyone have a wreck they would cut the footbox out of?
Thanks for looking, Gary, NJ
Re: WTB foot pedal box
Autodynamics Pedals (clutch was cable)
[ external image ]
If you can not find a Pedal box, you can bolt the pedals in, some are expensive.
Tilton makes a really nice set includes all the pedals, you need to check if they will fit.
http://www.pegasusautoracing.com/produc ... RecID=4594
[ external image ]
Wilwood also has good pedals, you'd have to make your own set up
http://www.jegs.com/p/Wilwood/744524/10002/-1
[ external image ]
[ external image ]
Gas Pedal
http://www.appletreeauto.com/throttle-p ... -1055.html
[ external image ]
[ external image ]
If you can not find a Pedal box, you can bolt the pedals in, some are expensive.
Tilton makes a really nice set includes all the pedals, you need to check if they will fit.
http://www.pegasusautoracing.com/produc ... RecID=4594
[ external image ]
Wilwood also has good pedals, you'd have to make your own set up
http://www.jegs.com/p/Wilwood/744524/10002/-1
[ external image ]
[ external image ]
Gas Pedal
http://www.appletreeauto.com/throttle-p ... -1055.html
[ external image ]