I purchased a 1600 DP to build up to a Solo motor. I also received a bunch of parts including a few cams. I know the numbers might not mean anything since it might have been reground. But... any ideas of typically what engine this is for ??
It has Cofop on the Gear # VW 113.109.111 A
On the cam it has either 2BE or 28E cofop 0401091011
Thanks for any info
Cam??
Re: Cam??
I have no Idea what the numbers mean, but no one uses stock cams. Many uses Emgle W-120 camshafts. My current engine has a W-130, but it might be a bit too much. My other engine has an custom ground Isky cam which is matched to the flow chart numbers for the heads.
69 Beach Solo Vee, #65 FM
85 Lynx B Solo Vee
71 Zink C4 Solo Vee
85 Lynx B Solo Vee
71 Zink C4 Solo Vee
Re: Cam??
The numbers are from a stock CoFap cam- don't know if it is/was reground.
Hope this helps
Dietmar
http://www.quixoteracing.com
Hope this helps
Dietmar
http://www.quixoteracing.com