Distrutator cap
Distrutator cap
Is there any truth that the position of the third contact in the cap is in a slightly differant position to make that cyclinder run cooler?
-
- Posts: 201
- Joined: July 17th, 2006, 8:53 pm
Re: Distrutator cap
No. Changing a cap position has no affect on timing. The CORRECT question is..is the cam lobe ground 3 degrees retarded?
Persistent rumors for decades say that stock and 009 distributors have a 3 degree retard on #3, and the 050 distributor is ground straight up. Personally, I never saw it.
Persistent rumors for decades say that stock and 009 distributors have a 3 degree retard on #3, and the 050 distributor is ground straight up. Personally, I never saw it.
Re: Distrutator cap
Never done on the 009 distributor. The cap and lobes are symetrical.