Hi:
I ordered this distributor cap, and even though it is for a Beetle 65 it doesn't fit my distributor (too short): https://www.cip1.ca/ProductDetails.asp? ... 35-522-027
From the picture it looks this one would fit (taller): http://www.cip1.ca/ProductDetails.asp?P ... 35-522-056
Could somebody confirm this is the right model?
Thanks,
Jean
Distributor cap
Distributor cap
Jean-Sebastien Stoezel
WCMA FV #0
WCMA FV #0
Re: Distributor cap
Jean:
That IS correct for a '65.
Problem is, you are not running a' 65 distributor- you are PROBABLY running an 009
Try a 03010 cap. That should work for you. If they can't referrence that number, let me know and I will help you out.
Hope this helps
Dietmar
http://www.quixoteracing.com
That IS correct for a '65.
Problem is, you are not running a' 65 distributor- you are PROBABLY running an 009
Try a 03010 cap. That should work for you. If they can't referrence that number, let me know and I will help you out.
Hope this helps
Dietmar
http://www.quixoteracing.com
Re: Distributor cap
Hi Dietmar:
Thanks for the reply. I ordered caps for the 009.
Jean
Thanks for the reply. I ordered caps for the 009.
Jean
Jean-Sebastien Stoezel
WCMA FV #0
WCMA FV #0