Got tired of modifying link pins shims for use with offset bushings so I had a thousand made.
0.45 cents ea-
A bit less if ordering a complete set.
Dietmar
Quixote Racing
link pin shims
-
- Posts: 70
- Joined: January 23rd, 2008, 7:35 pm
Re: link pin shims
What is involved in modification? Thanks
Re: link pin shims
Changing the .od by about .030 to .035
Dietmar
Dietmar
-
- Posts: 70
- Joined: January 23rd, 2008, 7:35 pm
Re: link pin shims
So as to not have to relieve the dogbone? If the dogbone's been relieved the original od is ok? Thanks
Re: link pin shims
The answer to IF is YES, (usually).
Stock shims are larger .od than the head of the link pin( by about .035). So clearancing the carrier is SOMETIMES needed to clear the link pin. Can't tell you if the clearancing is enough to accept the stock shims.
Have never had to relieve ( clearance) the carrier when using modified shims.
Dietmar
Stock shims are larger .od than the head of the link pin( by about .035). So clearancing the carrier is SOMETIMES needed to clear the link pin. Can't tell you if the clearancing is enough to accept the stock shims.
Have never had to relieve ( clearance) the carrier when using modified shims.
Dietmar