Caracal c frame cracking
-
- Posts: 3
- Joined: August 15th, 2011, 5:10 pm
Caracal c frame cracking
Hello all, I have a caracal c that has hairline cracking on frame rails near trans mounting area, any info on if this is normal and any possible fixes?
Re: Caracal c frame cracking
Quickly said.. CRACKS IN THE FRAME ARE **NOT** NORMAL
.
Your picture is too 'tight' to show really WHERE The crack is located, but it's safe to say it definitely needs to be fixed .. and soon. Right now you have a repairable issue, but it could quickly develop into something MUCH more serious .. possibly leaving you sitting in the middle of a track somewhere waiting to get CLOBBERED
You should remove the engine and trans and take it to a welding shop for a proper repair. Shouldn't be too difficult. With a bit of 'zoom out' on the crack someone might be able to give you a better suggestion of just HOW it might be repaired. If you take it to the right place (someone familiar with race cars, preferably), it might be possible to repair it with the engine and trans still there, but can't tell for sure without a wider view. The repair itself is probably pretty easy.. except for the other stuff that might be in the way.
Steve, FV80
![Razz :P](./images/smilies/icon_razz.gif)
Your picture is too 'tight' to show really WHERE The crack is located, but it's safe to say it definitely needs to be fixed .. and soon. Right now you have a repairable issue, but it could quickly develop into something MUCH more serious .. possibly leaving you sitting in the middle of a track somewhere waiting to get CLOBBERED
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
You should remove the engine and trans and take it to a welding shop for a proper repair. Shouldn't be too difficult. With a bit of 'zoom out' on the crack someone might be able to give you a better suggestion of just HOW it might be repaired. If you take it to the right place (someone familiar with race cars, preferably), it might be possible to repair it with the engine and trans still there, but can't tell for sure without a wider view. The repair itself is probably pretty easy.. except for the other stuff that might be in the way.
Steve, FV80
The Racer's Wedge and now a Vortech, FV80
Re: Caracal c frame cracking
I'm not familiar with that part, or if the Caracal has an issue, but it looks easy to repair from what I can see.
If my interpretation of that picture is correct, I would probably drill a small hole at the end of the crack as a stop, then tig weld the crack to the hole and fill the hole as well.
That only fixes the crack and doesn't address the underlying problem.
If my interpretation of that picture is correct, I would probably drill a small hole at the end of the crack as a stop, then tig weld the crack to the hole and fill the hole as well.
That only fixes the crack and doesn't address the underlying problem.
Barry
Old Zink FV,
'87 Citation
Old Zink FV,
'87 Citation
Re: Caracal c frame cracking
Can not comment on whether this is "normal", but as with most cracks, I would drill a small hole above the end of the crack. Chances are that that would end the progression.
I would then weld some flat stock (1/8 or 3/16) to cover the crack.
My 2 cents for what it is worth.
Dietmar
Quixote Racing
I would then weld some flat stock (1/8 or 3/16) to cover the crack.
My 2 cents for what it is worth.
Dietmar
Quixote Racing
Re: Caracal c frame cracking
Hmm,
Steve at 6:09
Barry at 6:09
Dietmar at 6:11
Some fine choreography there...
Steve at 6:09
Barry at 6:09
Dietmar at 6:11
Some fine choreography there...
Barry
Old Zink FV,
'87 Citation
Old Zink FV,
'87 Citation
-
- Posts: 3
- Joined: August 15th, 2011, 5:10 pm
Re: Caracal c frame cracking
Thanks for the replies, i worded it wrong i knew it was not normal ,but was wondering if anybody else has run across this issue, the cracking is at frame rail on both sides. the cracking is at where a lynx b frame would stop, and the uprights would be for rear suspension if that helps, i have been thinking about adding bracing from trans mounts in front to rear section of frame to triangulate the rear frame section, any thoughts on maybe adding mounts across frame to center of trans using lower center bolts on tans case to mount to a cross brace?
Re: Caracal c frame cracking
I'm not familiar with the Caracal design. I think you should ask Fred Clark about this. He would certainly know.
http://www.caracalcars.com/index.htm
http://www.caracalcars.com/index.htm
Barry
Old Zink FV,
'87 Citation
Old Zink FV,
'87 Citation