Spindle Checking device
Posted: April 4th, 2016, 9:57 am
As I was checking one of my spindles yesterday, I thought I should share my 'device' info with the group - then I remembered I already did some time back (years). This morning, I decided to double check for my post and it appears that although I did build a web page for it, I never got around to actually POSTING my info. SO.. for any of you that can't quite figure out a good easy way to check for a bent spindle, here it is...
http://www.WedgeRacing.com/spindles .
This is a really cheap, but quite accurate tool that can be used with the spindle still mounted on the car. It weighs next to nothing and isn't too difficult to make, although it almost DEMANDS access to a lathe.
Works GREAT. Unfortunately, it confirmed that my spindle *IS* bent
Hope this is useful to someone out there.
Steve, FV80
http://www.WedgeRacing.com/spindles .
This is a really cheap, but quite accurate tool that can be used with the spindle still mounted on the car. It weighs next to nothing and isn't too difficult to make, although it almost DEMANDS access to a lathe.
Works GREAT. Unfortunately, it confirmed that my spindle *IS* bent
Hope this is useful to someone out there.
Steve, FV80